TECO JSDG2S-20A-EL - Page 405

7-43
Cn044 Analog monitoring output MON2 output proportion

JSDG2S-E does not
have this function

【
5-6-11
】
Initial Value Unit Setting Range Effective Cn029 Reset
100 % -1000 ~ 1000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
002FH 202CH 202CH O O O O O
Setting Description: Tlease refer to the setting description of Cn043.
Cn048 Switch delay time 1 of two stage gain mode

【
6-7-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 0.2ms 0 ~ 10000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0033H 2030H 2030H O O O O --
Setting Description: When using the Two Stage Gain Mode, the Delay Time from the first stage gain to the second stage
gain can be set.
Cn049 Switch time 1 of two stage gain mode

【
6-7-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 0.2ms 0 ~ 10000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0034H 2031H 2031H O O O O --
Setting Description: When using the Two Stage Gain Mode, the Conversion Time from the first stage gain to the second
stage gain can be set.
Cn050 Switch time 2 of two Stage Gain Mode

【
6-7-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
0 0.2ms 0 ~ 10000 -- --
RS-485 CANopen EtherCAT Pi Pe Pt S T
0035H 2032H 2032H O O O O --
Setting Description: When using the Two Stage Gain Mode, the Conversion Time from the second stage gain to the first
stage gain can be set.