3
Getting Started: S-2200x at a Glance (continued)
/BEEP ON/OFF: Confirm button / Activate or deactivate the beeping sound after a button press.
0-9: Numeric keys to input a frequency, a memory location, set the clock or an alarm.
Additionally，
[ 1 ] FM SET: Set the FM frequency range (in power off mode).
[ 2 ] LW ON/OFF: Enable/Disable the longwave (LW) band (in power off mode).
[ 3 ] 9kHz/10kHz: Set the medium wave (AM) tuning step and frequency range (in power off mode).
[ 4 ] Set FM de-emphasis time constant (while listening to FM).
[ 5 ] Set the signal capture sensitivity of ATS in Auto Paging (AP) mode.
[ 8 ] Display/Hide seconds on the clock (in power off mode).
[ 0 ] : Auto Sorting Memory: Organizes frequencies stored into the memory (in power off mode).
M: Store frequencies into memory.
BW / FM STEREO: Adjust the AM bandwidth / Select FM stereo or mono mode / Adjust the signal
capture sensitivity of Auto Tuning Storage (ATS).
SSB: Enable/Disable Single Sideband mode (USB: Upper Sideband / LSB: Lower Sideband).
SYNC: Enable/Disable synchronous detection.
VOLUME: Volume adjustment knob
TREBLE: Treble adjustment knob
BASS: Bass adjustment knob
LINE IN: Audio input socket (Φ3.5 mm)
EAR: Stereo headphone socket (Φ3.5 mm)
Speaker
TIMER B: Set, enable/disable alarm B.
TIMER A: Set, enable/disable alarm A.
TIME: Set and display the clock.
, DISPLAY/SNOOZE: Backlight switch / Display mode / Enable/Disable alarm snooze function.
SIGNAL: Signal strength indicator
LW/MW ROTATABLE ANTENNA: Rotatable longwave / medium wave (AM) magnetic rod antenna
LCD screen
Whip antenna (for shortwave / FM / airband)
DEL. : Delete frequencies stored into memory.
To Next Page
Loading...
