Tfektronix
COMMITTED TO EXCELLENCE
data sheet
CUSTOMER SERVICES SUPPORT
P6105 PASSIVE PROBE
The P6105 Probe is a miniature, XOX, passive probe for use with do to
100 MHz oscilloscopes with an input capacitance range of 15-47 pF and
an input resistance of 1 Mft..
A ground reference push button on the probe head permits the user to ob
tain a ground reference or to determine a trace in a multitrace display.
A coding pin on the BNC output connector actuates the Volts/Div readout
encoding of the oscilloscope to include the 10X attenuation of the probe
WARNING
To avoid shock, do not disassemble when connected to voltage source.
Disassembly is a service operation only. Refer servicing to qualified
service personnel.
The compensating box houses a network that provides optimum transient re
sponse when used with 100 MHz oscilloscopes. Modular construction of the
probe simplifies repairs, as both probe head and compensating box can be un-
pluqqed from the cable assembly. The P6105 Probe is available in three
lengths and is identified by the colored strain relief at each end of
the cable: blue = 1 meter (3.3 ft), yellow = 2 meter (6.6 ft), red = 3
meter (9.9 ft).
N O .
062 1 7 96 00
DATE
NOV. 1979 (R )
CO FY 11C HT 1974
TEK TRONIX INC
R U RICH TS RiSEKVfO
To Next Page
Loading...
