Section 7—455/A2/B2
INSTRUMENT OPTIONS
Your instrument may be equipped with one or more instrument options. A brief description of each option is given
in the following discussion. Complete information is located behind this page.
Conversion kits for some options are available and can be installed at a later time. For further information on instrument
options, see your Tektronix Catalog or contact your Tektronix Field Office.
OPTION 4
Modifies the 455 to meet the EMC requirements of MIL-STD-461A when tested in accordance with the following test
methods of MIL-STD-462:
CE-01, CE-03, CS-01, CS-02, CS-06, RE-02 (limited to 1 GHz),
(T) RE-04, RS-01, and RS-03 (limited to 1 GHz).
OPTION 5
Adds a tv sync separator to the B2 module to provide stable triggering from composite video waveforms.
OPTION 7
Permits the 455 to be powered from a dc source of 12 volts or 24 volts in addition to the standard ac line operation. For
battery operation. Option 7 makes the 455 compatible with the Tektronix 1106 Battery Pack.
OPTION 78
Changes crt type to one with a P11
phosphor.
REV B, NOV 1978
7
To Next Page
Loading...
Need help?
General
