Getting Started
1-12 SPG600 & SPG300 Sync Pulse Generators User Manual
Optional Accessories
You can order the following optional accessories to use with the sync pulse
generators:
Documents
The following documents are optional accessories:
SPG600 & SPG300 Sync Pulse Generators User Manual (printed manual),
Tektronix part number 071-1340-XX
SPG600 & SPG300 Sync Pulse Generators Service Manual, Tektronix part
number 071-1342-XX
Rackmounting Kits
(SPG300 Only)
The following rackmounting kits are optional accessories for the SPG300:
TVGF11A: Rackmounts a single instrument in a standard 19-inch rack.
TVGF13: Rackmounts two half-rack width instruments side-by-side in a
standard 19-inch rack.
Options
The sync pulse generator can be ordered with the following instrument options:
Rackmount (SPG600 Only)
The following rackmount option is available for the SPG600:
Option 1R: Adds the hardware to install the instrument into a standard 19-inch
rack.
Additional Features
You can add fine timing offset, analog outputs, and serial digital outputs.
Option 01 (SPG600 and SPG300): Adds fine timing offset for analog outputs.
Option 02 (SPG600 only): Adds four channel analog video outputs.
Option 03 (SPG600 only): Adds two channel SD-SDI video outputs.
Service Options
The following service options are available for the sync pulse generator:
Option D1: Provides calibration data.
Option D3: Provides calibration data for 3 years.
Option D5: Provides calibration data for 5 years.
Option C3: Provides calibration services for 3 years.
Option C5: Provides calibration services for 5 years.
To Next Page
Loading...
Need help?
General
