Tektronix SPG600 User Manual

Menus
3-18 SPG600 & SPG300 Sync Pulse Generators User Manual
AES/EBU
Sets the parameters for AES/EBU serial audio. When you select this menu item and
then press the ENTER button, you will access the AES/EBU submenu. Refer to
AES/EBU Submenu on page 3-19 for detailed information.
EMBEDDED (STD/BLK)
Sets the parameters for embedded audio on the serial digital black signals. Use the
left (
W) or right (X) arrow button to select Group 1, Group 2, Group 3, or
Group 4. When you select either of the groups and then press the ENTER button,
you will access the Embedded submenu. Refer to Embedded Submenu on page
3-20 for detailed information.
EMBEDDED (STD/TEST)
Sets the parameters for embedded audio on the serial digital test signals. Use the
left (
W) or right (X) arrow button to select Group 1, Group 2, Group 3, or
Group 4. When you select either of the groups and then press the ENTER button,
you will access the Embedded submenu. Refer to Embedded Submenu on
page 3-20 for detailed information.
EMBEDDED (OPT/BLK)
Sets the parameters for embedded audio on the serial digital black signals. Use the
left (
W) or right (X) arrow button to select Group 1, Group 2, Group 3, or
Group 4. When you select either of the groups and then press the ENTER button,
you will access the Embedded submenu. Refer to Embedded Submenu on
page 3-20 for detailed information. This menu item is only available for the
SPG600 Option 03.
EMBEDDED (OPT/TEST)
Sets the parameters for embedded audio on the serial digital test signals. Use the
left (
W) or right (X) arrow button to select Group 1, Group 2, Group 3, or
Group 4. When you select either of the groups and then press the ENTER button,
you will access the Embedded submenu. Refer to Embedded Submenu on
page 3-20 for detailed information. This menu item is only available for the
SPG600 Option 03.
ANALOG
Selects an audio channel(s) when outputting an analog audio signal from the XLR
connectors. Use the left (
W) or right (X) arrow button to select Left, Right, or
Both. When you select either of the channels and then press the ENTER button,
you will access the Audio Channel submenu. Refer to Audio Channel Submenu on
page 3-21 for detailed information. This menu item is only available when you
select Analog Audio in the CONFIGRATION: XLR OUTPUT menu.

Tektronix SPG600 Specifications

General

Brand	Tektronix
Model	SPG600
Category	Pulse Generator
Language	English