Tektronix T202 - Channel 1 and Channel 2 Data Readout

NUMERIC INPUT
Press: I CURSOR 1 I or I CURSOR 2 I I::±] or
Q □ []] IT] []] I SHIFTI [2]
Display: CH X1 or X2 + or - .050 V
Track Cursor
The track command allows both of the X cursors
and both of the Y cursors to be positioned at the
same time . The voltage relationship of the X cur-
sors and timing relationship of the Y cursors re-
mains constant when repositioned .
TRACKING X CURSORS WITH UP-ARROW AND
DOWN-ARROW KEYS
Press: I CURSOR 1 I or I CURSOR 2 I
I SHIFTI I TRACKI ~ or 00
Display: CH C1 or C2 CURS/TAK ~ or T
TRACKING X CURSORS WITH NUMERIC ENTRY
Press: I CURSOR 1 I or I CURSOR 2 I
I SHIFTI I TRACKI GJ or Cl I SHIFTI D OJ
[[] [I] I SHIFTI ~
Display: CH C1 or C2 CURS/TRACK + or -
. 182 V
TRACKING Y CURSORS WITH LEFT -ARROW
AND RIGHT -ARROW KEYS
Press: I CURSOR 1 I or I CURSOR 2 I
I SHIFTI I TRACKI ~ or~
Display: CH C1 or C2 CURS/TRACK ◄ or ►
4-12 -------------
TRACKING Y CURSORS WITH NUMERIC ENTRY
Press: I CURSOR 1 I
1 SHIFTI I TRACKI 0
[[] [I] I msl
or I CURSOR 2 I
or Q I SHIFT! OJ
Display: CH C1 or C2 CURS/TRACK + or -
182 ms
Channel 1 and Channel 2 Data Readout
Readout Display
The data readouts can be either called up or re-
moved from the display by the following instruc-
tion:
Press: I SHIFTI I READOUT ON /O FF I
Display : RDOUT ON or RDOUT OFF
Scrolling and Vertical Positioning
The channel readout can be scrolled across the
display using the left-arrow and right-arrow keys
and vertically positioned using the up- arrow and
down-arrow keys.
SCROLLING
Press: I POS READOUT I ~ or~
Display: POS RDOUT ◄ or ►
VERTICAL POSITIONING
Press: I POS READOUT I ~ or 00
Display: POS RDOUT ~ or T
- Operating Instructions ---- 4-13