Tektronix T202 User Manual

"
Re cord Length-256 points for CH 1 and CH 2 in
si ngle and alternating operation ; 128 points each in
chop operation.
Mini mum Resolution in Time Measurement (at
50 ns per division)
Cont inuous Sweeps-2 . 5 ns per data point .
Single Sweep-SO ns per data point.
R ef erence System of Time Base-40 MHz +/ - 50
pa rt s per million and is Quartz crystal controlled.
Memory
Save Reference Memory-Nine 256 point sin-
gle channel acquisitions may be saved in ref-
erence memory.
Save Setup Memory-Memory locations are
available for storage of up to nine keyboard
setups ; vertical sensitivity and coupling are
not capable of be ing saved .
Cursors
Delta Ti me Measurement Accuracy-+ / -0 .1 divi-
sion of SEC/ DIV.
D el ta Voltage Measurement Accuracy - Same as
ver tical system.
X- Y Operation
5-4
De flect ion Factors-Same as vertical deflec-
tion sy stem .
Accuracy-Same as vertical deflection sys-
te m .
DVM/COUNTER (voltage and time)
Frequency and Period
1 Hz to 100 Hz at +/-0 . 5%
101 Hz to 500 kHz at +/ - 0.08 %
500 kHz to 5 MHz at +/-0 .04%
Frequency and period is automatically calcu-
lated if signal duty cycle is greater than 33% .
Voltage Measurement of True RMS , Average ,
Peak to Peak, and Zero to Peak-Refer to display
accuracy .
Display
Dimensions of Display Area-5 . 76 cm x 5. 76 cm
with 6. 4 divisions x 6. 4 divisions with 20 display
points per division.
Usable Signal Area-100 points vertically by 128
poi nts horizontally.
Battery Pack Electrical Characteristics
Battery Charging
Charging Current (switch selectable)
Low-100 mA ( 1 ampere-hour batteries)
High-200 mA (4 ampere - hour batteries)
Charging Time (full recharge of nickel- cadmium
batteries)
1 Ampere-hour Batteries - 12 hours to 14
hours.
4 Ampere-hour Batteries-24 hours to 30
hours .
- Performance Conditions ----
5-5

Tektronix T202 Specifications

General

Brand	Tektronix
Model	T202
Category	Test Equipment
Language	English