Disassembly
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual
7-11
Replacing the Fan
If you need to replace the fan, you must first detach the rear panel of the
amplifier from the chassis to gain access to the fan:
1. Remove the 2 Phillips screws that attach the AC power connector to the rear
panel. See Figure 7--8.
Amplifier
Phillips screws (2)
Torque screws to 4 in-lbs
when reassembling
Figure 7- 8: Removing the AC power connector
To Next Page
Loading...
