Tektronix TCPA300 SERIES - Mechanical Characteristics; Table 4- 3: TCPA300 and TCPA400 Mechanical Characteristics

Specifications
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual
4-3
Table 4- 2: Nominal and typical amplifier characteristics (Cont.)
Parameter
Installed probe
Parameter
TCP404XLTCP303TCP305TCP312
Low Current Sensitivity Range 1 A/V Range 5 A/V Range 5 A/V Range N/A
DC (conti nuous).......
5A
25 A 25 A -- -- --
(
)
DC (nonconti nuous).......
N/A
N/A N/A -- -- --
(
)
RMS (sinusoidal).......
3.5 A
17.7 A 17.7 A -- -- --
(
)
Peak Puls e.......
50 A
50 A 500 A -- -- --
Input Voltage 100--240 VAC (±10%), 47 Hz to 440 Hz, single phase
Maximum Power 50 Watts maximum
Fuse Rating 3.15 AH, 250 V (Not operator-replaceable.)
Mechanical Characteristics
Mechanical characteristics of the amplifiers are listed in Table 4--3.
Table 4- 3: TCPA300 and TCPA400 mechanical characteristics
Parameter, nominal Characteristic
Length 173 mm (6.8 in)
Width 91.4 mm (3.6 in)
Height 167 mm (6.6 in)
Weight 1.14 kg (2.5 lb)