Preface
Preface
This manual c
ontains operating information for the TDS2000C and
TDS1000C-EDU Series Digital Storage Oscilloscopes. The manual consists of
the following chapters:
The Getting Started chapter briefly describes features of the oscilloscope
and provides installation instructions.
The Operating Basics chapter covers operating principles of the oscilloscopes.
The Unders
tanding Oscilloscope Functions chapter describes basic operations
and functions of an oscilloscope: setting up the oscilloscope, triggering,
acquiring data, scaling and positioning waveforms, and taking measurements.
The Application Examples chapter provides examples on how to solve a
variety of measurement problems.
The Math FFT chapter describes how to use the Math Fast F ourier Transform
function to convert a time-domain signal into its frequency components
(spectrum).
The USB Flash Driv e and Device Ports chapter describes how to use the
USB Flash Drive port and how to connect the oscilloscope to printers and
computers through the USB Device port.
The Reference chapter describes the selections or available range of values
for e ach option.
The Appendix A: Specifications chapter includes electrical, environmental,
and physical specifications for the oscilloscope and the TPP0101 and
TPP0201 probes, as well as certifications and compliances.
The Appe ndix B: Accessories chapter briefly describes standard and optional
accessories.
The Appendix C: Cleaning chapter describes how to take care of the
oscilloscope.
The Appendix D: Default Setup chapter contains a list of the menus and
controls with the default (factory) settings that are recalled when you push
the Default Setup front-panel button.
The Appendix E: Font Licenses chapter provides the licenses to use specifi c
Asian fonts.
TDS2000C and TDS1000C-EDU Series Oscilloscope User Manual xiii
To Next Page
Loading...
Need help?
General
