Tektronix TDS2000C series User Manual

Operating Basics
Trigger Contr
ols
4-channel model
2-channel model
Level. When you use a n Edge or Pulse trigger, the Level knob sets the amplitude
level tha
t the signal must cross to acquire a waveform.
Trig Menu. Displays the Trigger Menu.
Set To 50%. The trigger level is set to the vertical midpoint between the peaks of
the trigger signal.
Force Trig. Completes an acquisition regardless of an adequate trigger signal.
This button has no effect if the acquisition is already stopped.
Trig View. Displays the trigger waveform in place of the channel waveform while
you hold down the Trig View button. Use this to see how the trigger settings
aff
ect the trigger signal, such as trigger coupling.
Menu and Control Buttons
Multipurpose knob
TDS2000C and TDS1000C-EDU Series Oscilloscope User Manual 15

Tektronix TDS2000C series Specifications

General

Brand	Tektronix
Model	TDS2000C series
Category	Test Equipment
Language	English