Tektronix WFM6120 Service Manual

Replaceable Parts
Table 5-1: Circuit boards and connectors (See Figure 5-1.) (cont.)
Fig. &
index
number
Tektronix part
number
Serial no.
effective
Serial no.
discont’d Qty Name & descri
ption
-33 131-5450-00 1
CONN,DSUB; PCB,HIGH DENSITY;FEMALE,RTANG,15 POS,0.078
CTR,0.350 M
LG X 0.125 TAIL,4-40 THD INSERT,BD RETENTION,30
GOLD,SAFETY CONTROLLED
-34 131-3378-00 2
CONN,RF,JA
CK; BNC,50 OHM,FEMALE,RTANG,PCB/REAR PNL,0.5-28
THD,0.625 H X 0.187 TAIL,W/O MTG FLANGE,W/MTG POSTS,METAL
BODY
-35 211-0722-
00
10
*
SCREW,MACHINE; 6-32 X 0.250,PNH,STL,CDPL,T-15 TORX DR
-36 131-3378-00 4
CONN,RF,
JACK; BNC,50 OHM,FEMALE,RTANG,PCB/REAR PNL,0.5-28
THD,0.625 H X 0.187 TAIL,W/O MTG FLANGE,W/MTG POSTS,METAL
BODY
-37 333-451
3-00
1
PANEL,REAR; COMPOSITE OPT. 0.050 AL,5052-H32 MILL FINISH;
SAFETY CONTROLLED
-38 333-451
4-00
1
PANEL,REAR;EYE OPT.;.050 AL,5052-H32, FINISH ,SAFETY
CONTROLLED
-39 131-75
64-00
4
CONN,RF PLUG; DUAL STACKED BNC,PCB,PNL
MNT,FEMALE,RTANG,75 OHM, ZINC DIE CAST HOUSING
-40 131-M0
57-00
4
CONN,RF:PCB,FEMALE,BNC,75OHM,EDGE LAUNCH TYPE
-41 220-0271-00 8
SPANN
ER NUT AND LOCKWASHER
210-0410-00 2
*
SCR,ASSEM W SHR; 4-40 X 0.437,PNH,STL,CDPL,T-10 TORX DR (STD)
-42
214-3
903-00
2
*
SCREW,JACK; 4-40 X 0.312 LONG,0.188 H HEX HEAD STAND OFF,4-40
INT THD, X 0.312 THD EXT 4-40 (OPTION AD OR DDE ONLY)
-43 333-
4489-00
1
PANEL,REAR; AUDIO OPTION, 0.050 AL,SAFETY CONTROLLED
-44 200-4800-00 1
*
COVE
R,MINI; 2X FEX-440,SAFETY CONTROLLED (OPTION DS, STD)
-45 131-7272-00 1
CONN, DSUB; PCB/PNL, FEMALE, 62 POS, RTANG, 0.100 CTR, 0.495
HX0
.125 TAIL, 30 GOLD, 4-40 THD INSERTS, BOARD RETENTION,
HIGH DENSITY CONN
-46 211-0722-00 2
SCR
EW,MACHINE; 6-32 X 0.250,PNH,STL,CDPL,T-15 TORX DR (USED
WITH WFM7F02 PORTABLE CASE ONLY)
*
Quantity will vary depending on instrument model and installed options.
5–4 WFM6120, WFM7020, and WFM7120 Waveform Monitors Service Manual

Tektronix WFM6120 Specifications

General

Brand	Tektronix
Model	WFM6120
Category	Monitor
Language	English