Telect ELF-9716-1900 - ELF 6-Termination DSX-1, Wire-Wrap I;O (Model ELF-3006-1100); Figure 17 - Model ELF-3006-1100 Dimensions; Figure 18 - Model ELF-3006-1100 Reference Schematic

© Telect, Inc., All Rights Reserved, 124317-10 A0
1.509.926.6000 :: telect.com
23
ELF System
Copper / Fiber :: ELF Family
2.4 ELF 6-Termination DSX-1, Wire-Wrap I/O (Model ELF-3006-1100)
Six-circuit NE I/O and cross-connect pinelds and Bantam-style patch and monitor jacks are all on the front. Both
pinelds provide individual shield grounds for each set of jacks. Screws for mounting module to an ELF chassis,
wall-mount bracket, or lockable wall-mount enclosure are included.
Circuit Designation
Label
Jumper
Tie-Down Bar
6-Termination Module
DSX-1 Bantam
Jacks
Network Element Pinfield
4.25
(108.0)
5.11 (129.7)
1.63
(41.3)
0.55
(13.9)
Note: Dimensions are in in. (mm)
Cross-Connect Pinfield
Top View
5.86 (148.8)
1
2
3
4
5
6
8
7
Figure 17 - Model ELF-3006-1100 Dimensions
OUT
S. GND.
X-CON
IN
MON
S. GND.
I/O
T
R
IN
R
T
OUT
R
T
R
T
OUT
IN
R2
R1
REFERE NCE SCHEMATIC
(TYPICAL FOR ALL CIRCUITS)
RESISTOR VALUE = 475 ohm
Figure 18 - Model ELF-3006-1100 Reference Schematic