Telegesis ETRX357-LR - Page 14

R309 AT Commands
©2015 Telegesis (UK) Ltd - 14 - AT Command Manual (Rev 3.09)
Command Overview (continued)
Messaging
AT+ATABLE
Display Address Table
AT+ASET
Set Address Table Entry
AT+MTABLE
Display Multicast Table
AT+MSET
Set Multicast Table Entry
AT+BCAST
Transmit A Broadcast
AT+BCASTB
Transmit A Broadcast Of Binary Data
AT+UCAST
Transmit A Unicast
AT+UCASTB
Transmit A Unicast Of Binary Data
AT+SCAST
Transmit Data To The Sink
AT+SCASTB
Transmit Binary Data To The Sink
AT+SSINK
Search For A Sink
AT+MCAST
Transmit A Multicast
AT+MCASTB
Transmit A Multicast Of Binary Data
AT+DMODE
Enter Data Mode (Serial Link Mode)
+++
Leave Data Mode
AT+IDENT
Play A Tune On Remote Devboard
AT+SENDUCAST
Send A Raw ZCL/ZDO Unicast
AT+SENDUCASTB
Send A Raw Binary ZCL/ZDO Unicast
AT+SENDMCAST
Send A Raw ZCL/ZDO Multicast or Broadcast
AT+SENDMCASTB
Send A Raw Binary ZCL/ZDO Multicast or Broadcast
AT+INTERPAN
Send an Interpan Command
AT+RDATAB
Send Binary Raw Data
Binding Management
AT+LBTABLE
Display Local Binding Table
AT+BSET
Set Local Binding Table Entry
AT+BCLR
Clear Local Binding Table Entry
AT+BTABLE
Display Binding Table (ZDO)
AT+BIND
Create Binding on Remote Device (ZDO)
AT+UNBIND
Delete Binding on Remote Device (ZDO)
AT+EDBIND
Request End Device Binding (ZDO)
Time-related commands
AT+SETTIME
Set the Local Time
AT+GETTIME
Get the Local Time
AT+SYNCTIME
Synchronize the Local Time with Time Server
Table 5: Command Overview