Teletek electronics TTE Combo - Page 35

TTE Combo Communication Module – Installation and Programming Manual
35
SIA
Code
Event Code Description Address Field
DF
Door Forced
Door opened without access request.
Door number
DG
Access Granted
Door access granted.
Door number
DK
Access Lockout
Access denied, known code.
Door number
DO
Access Open
Access to authorized users allowed.
Door number
DR
Door Restoral
Access alarm/trouble condition eliminated.
Door number
DS
Door Station
Identifies door for next report.
Door number
DT
Access Trouble
Access system trouble.
Unused
DU
Dealer ID
Dealer ID number.
Dealer ID
EA Exit Alarm
An exit zone remained violated at the end of the exit
delay period.
Zone or point
EE Exit Error
An exit zone remained violated at the end of the exit
delay period.
User number
EJ Expansion Tamper Restore Expansion device tamper restoral.
Expansion
device number
EM Expansion Device Missing Expansion device missing.
Expansion
device number
EN Expansion Missing Restore Expansion device communications re-established.
Expansion
device number
ER Expansion Restoral Expansion device trouble eliminated.
Expander
number
ES Expansion Device Tamper Expansion device enclosure tamper.
Expansion
device number
ET Expansion Trouble Expansion device trouble.
Expander
number
FA
Fire Alarm
Fire condition detected.
Zone or point
FB
Fire Bypass
Zone has been bypassed.
Zone or point
FH
Fire Alarm Restore
Alarm condition eliminated.
Zone or point
FI
Fire Test Begin
The transmitter area's fire test has begun.
Area number
FJ
Fire Trouble Restore
Trouble condition eliminated.
Zone or point
FK
Fire Test End
The transmitter area's fire test has ended.
Area number
FQ
Fire Supervisory Trouble
Restore
A fire supervisory zone that was in trouble condition has
now restored to normal.
Zone or point
FR
Fire Restoral
Alarm/trouble condition has been eliminated.
Zone or point
FS
Fire Supervisory
Unsafe fire detection system condition.
Zone or point
FT
Fire Trouble
Zone disabled by fault.
Zone or point
FU
Fire Unbypass
Bypass has been removed.
Zone or point
FX
Fire Test
Fire zone activated during test.
Zone or point
FY
Missing Fire Trouble
A fire point is now logically missing.
Zone or point
GA
Gas Alarm
Gas alarm condition detected.
Zone or point
GB
Gas Bypass
Zone has been bypassed.
Zone or point
GH
Gas Alarm Restore
Alarm condition eliminated.
Zone or point
GJ
Gas Trouble Restore
Trouble condition eliminated.
Zone or point
GR
Gas Restoral
Alarm/trouble condition has been eliminated.
Zone or point
GS
Gas Supervisory
Unsafe gas detection system condition.
Zone or point
GT
Gas Trouble
Zone disabled by fault.
Zone or point
GU
Gas Unbypass
Bypass has been removed.
Zone or point
GX
Gas Test
Zone activated during test.
Zone or point
HA
Holdup Alarm
Silent alarm, user under duress.
Zone or point