ME310G1 Hardware Design Guide
1VV0301588 Rev. 16 Page 13 of 95 2021-10-27
• CATM and NBIoT technologies
• SMS support (text and PDU)
• Alarm management
• Real-Time Clock
• USB 2.0 HS (AT command* and FW upgrade)
• USIF0 Main UART (AT command* and FW upgrade)
• USIF1 Secondary UART (Not currently supported)
• AUX UART (AT Command*, AppZone Diagnostic)
• SPI
• 6 GPIOs
• Antenna port
Table 3: Functional Features * Functionality depending on ports configuration
2.5 TX Output Power
2.5.1 ME310G1-W1
B1, B2, B3, B4, B5, B8, B12, B13, B14, B18, B19,
B20, B25, B26, B27, B28, B66, B85, B8_39d
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20,
B25, B26, B28, B66, B71, B85, B86, B8_39d
Table 4: Transmission Output Power ME310G1W1
2.5.2 ME310G1-WW
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19,
B20, B25, B26, B27, B28, B66, B85, B8_39d
B1, B2, B3, B4, B5, B8, B12, B13, B18, B19,
B20, B25, B26, B28, B66, B85, B86, B8_39d
Table 5: Transmission Output Power ME310G1-WW