Table 53: FCC ID
12.3.7 ISED Label and Compliance Information/
Étiquette et Informations
de Conformité ISDE
The host product shall be properly labeled to identify the modules within the host product.
The ISED certification label of a module shall be visible at all times when installed in the
host product; otherwise, the host product must be labeled to display the ISED certification
number for the module, preceded by the word "contains" or similar wording expressing
the same meaning, as follows:
Contains IC: XXXXXX-YYYYYYYYYYY
In this case, XXXXXX-YYYYYYYYYYY is the module's certification number.
Le produit hôte devra être correctement étiqueté, de façon à permettre l'identification
des modules qui s'y trouvent.
L'étiquette d'homologation d'un module d'ISDE devra être apposée sur le produit hôte à
un endroit bien en vue, en tout temps. En l'absence d'étiquette, le produit hôte doit porter
une étiquette sur laquelle figure le numéro d'homologation du module d'ISDE, précédé
du mot « contient », ou d'une formulation similaire allant dans le même sens et qui va
comme suit:
Contient IC : XXXXXX-YYYYYYYYYYY
Dans ce cas, XXXXXX-YYYYYYYYYYY est le numéro d'homologation du module.