Telstra Elite - Page 18

TELSTRA ELITE™ GATEWAY USER GUIDE
18
STATI C MODE
1. FromtheConfiguredropdownlist,youcansetyourcomputertoStaticIPmodeby
selectingtheoptionManually.
ThefollowingstepsshowhowtoassignaStaticIPaddresstoyourMac
2. SettheIPaddressto10.0.0.x.(wherexisanumberbetween1and254)withsubnetmask
of255.255.255.0.
3. SetthedefaultgatewayandDNSservertothegateway’sIPaddress.
NOTE: The IP address of the gateway is 10.0.0.138. (default), so the computer must be set with a different IP to the gateway. In
the case below, the PC’s IP address is set as 10.0.0.2
4. ClickApplytosubmitthesettings.