Tenda AC6 - Page 30

Functions on the router’s user interface
29
2. Click Please select.
3. Find and click the WiFi name of router A.
Tips
Router B must support router A’s channel range, otherwise the WiFi name of router A won’t be
displayed in the Base Station WiFi Name list. For example, if router A works in channel 13, but the
channel range of router B is 1~11, you won’t find the WiFi name of router A. So you must select the
correct country (the country where you use the router), because channel range varies accross
countries. Or you can set router A’s channel to the one within router B’s channel range.
4. Type the WiFi password of router A.
5. Click Save.