Functions on the router’s user interface
34
Tips
Router B MUST contain the router A’s channel, or the router A’s WiFi name (wireless network name)
won’t be displayed in the Base Station WiFi Name list. For example, if the router A’s channel is 13,
but router B’s channel range is 1~11, you won’t find the router A’s WiFi name in the Base Station
WiFi Name list. So you’d better select the correct country (the country where you use the router),
because the Channel range varies in different countries. Or you can set the router A’s channel to the
one within router B’s channel range.
5. Type the security key (WiFi password) of the base station.
6. Click Save.
7. Click OK on the prompt windows.
Check whether the bridge is successful
After this router (router B) auto-reboots, log in to this router’s (router B’s) user interface, and click
internet Status. Check the connection status. If it displays Bridged successfully in Universal
Repeater mode, it indicates that the bridge is successful.
To Next Page
Loading...
