OUTRIGGERS - contain 3 LEDs. These
indicate the selection of either full outriggers,
intermediate, or retracted outriggers.
MANUAL SECTION - contains 1 LED. It is
active on cranes that have pinned
extensions or active tip boom options.
TIRES - contain 1 LED. When operation on
tires is selected, the outrigger LED will turn
off and the tire LED will illuminate.
JIBS - contain 6 LEDs. These indicate the
length and offset of the jib in use.
COUNTERWEIGHT - contains 1 LED. It is
only active on cranes that have
counterweight options.
AUX HEAD - contains 1 LED that illuminates
when the AUX HEAD is fitted.
WINCH - contains 2 LEDs. These indicate
the selection of FRONT or REAR winch.
POINT OF LIFT - contains 3 LEDs. One will
illuminate to show the point of lift.
STOWED JIB - contains 1 LED. This will be
illuminated when the jib is stowed on the
boom.
RT500
Operating Instructions
70 REVISED:
To Next Page
Loading...
