Wire Rope Specifications
MAIN WINCH
STD. - 5/8” 6X19 OR 6X37 XIPS IWRC
PREFORMED RIGHT REG. LAY WIRE ROPE
WEIGHT 0.66 LBS/FT
MINIMUM BREAKING STRENGTH - 20.6 TONS
OPT. - 5/8” ROTATION RESISTANT
34 X 7 COMPACTED STRAND, GRADE 2160
WEIGHT 0.84 LBS/FT
MINIMUM BREAKING STRENGTH - 28.21 TONS
AUXILIARY WINCH
STD. - 5/8” 6X19 OR 6X37 XIPS IWRC
PREFORMED RIGHT REG. LAY WIRE ROPE
WEIGHT 0.66 LBS/FT
MINIMUM BREAKING STRENGTH - 20.6 TONS
OPT. - 5/8” ROTATION RESISTANT
34 X 7 COMPACTED STRAND, GRADE 2160
WEIGHT 0.84 LBS/FT
MINIMUM BREAKING STRENGTH - 28.21 TONS
Terex permits the use of rotation resistant wire rope, other types are not
approved. When this rope is used the working load shall not exceed 1/5th (20%)
of the rated breaking strength. The retirement criteria shall be as follows: two
broken wires in six rope diameters or four broken wires in thirty rope diameters.
Specifications
201REVISED:
To Next Page
Loading...
