Description
TV800/900 Roller 0102-5 April 2011 5-4
Circuit Breakers
In the event of a fault occurring, the circuit breaker will trip out,
this being indicated by the button protruding out beyond its
normal position.
Should this occur, the reason for the overload must be found and
the components at fault replaced or repaired.
When the repair has been completed the circuit breaker should
be reset by pressing the button until it locks in position thus
restoring the electrical supply.
All machines have a 20Amp circuit breaker (A) to protect the
standard circuit, machines with full RTA lighting, have an extra
30Amp circuit breaker (B).
Emergency Stop Button
The RED emergency stop switch (A); when pressed, will
immediately stop the engine and all electrical/hydraulic systems
will stop functioning.
To release turn the switch knob in the direction of the arrow
embossed on the knob (Clockwise). Ensure all controls are in
Neutral.
Hour Meter
The hour meter (B) records the total period of time the engine
has run in one hour and tenth of an hour units. The meter records
only when the engine is running.
To Next Page
