Terex TV800 - To Select Vibration

Operating Instructions
TV800/900 Roller 0102-5 April 2011 7-8
To Select Vibration
• Select either single or double drum vibration.
• Set the hand throttle for low or high frequency vibration
(Position 2 or 3).
• Move control lever to Half Speed gate.
• Press button on control lever to switch on vibration.
• To stop vibration press the button on the control lever a
second time.
NOTE:- If the control lever is moved into the Neutral or Full
Speed gates while vibrating vibration will stop.
NOTICE
Do Not Use Vibration On Hard Surfaces