7-9 TV800/900 Roller 0102-5 April 2011
Operating Instructions
Towing the Roller
In the event of a problem it is possible to release the brakes
enabling the roller to be towed.
To Release the brakes:-
• Open the bonnet.
• Remove key from battery isolator switch - this prevents
engine from being started.
• Remove plastic cover (B) from tow valve (A).
• Fit battery isolator key (C) into tow valve and turn fully
clockwise to “Tow” position (1).
• Move the steering from side to side to generate enough
hydraulic pressure to release the brakes.
• The roller is now ready for towing.
To Re-instate the Brakes
Turn the key in the tow valve fully anti clockwise to the “Drive”
position (2).
Remove key and refit to battery isolator switch.
Check the brakes are working correctly.
b
The Machine Must Be On Firm, Level Ground And The
Drums Are Chocked Before Brakes Are Released.
To Next Page
