9-3 TV800/900 Roller 0102-5 April 2011
Maintenance
Battery
Battery Isolator
See Battery Isolator in Description section. The battery isolator
should be set to “Off” before minor maintenance. For major
maintenance tasks the battery should be disconnected.
Battery Access
The battery is located under the floor plate.
• Remove the 4 nuts fixing the floor plate to the machine and
remove the floor plate to gain access to the battery.
Battery Removal
• Remove the Negative battery lead (C) and then the Positive
battery lead (D) from the battery (A).
• Remove the 2 bolts holding the battery strap (B).Remove
strap.
• Lift battery out using handles provided.
Battery Replacement
Before replacing the battery ensure the battery area and the
battery are clean and free from corrosion.
• Refit the battery.
• Refit the battery strap and secure with the 2 bolts.
• Lightly smear battery terminal posts and clamps with
petroleum jelly.
• Refit the Positive battery lead (D).
• Refit the Negative battery lead (C).
b
Always wear safety glasses when removing or working on
a battery
To Next Page
