Terramite T6 - Page 110

Copyright © 1999 Terramite Corporation
S
Index (Continued)
7.3
Q
P
O
Model J-HP High Pressure Relief ........................................................................................... 4.11
Motor, Front Drive Torque (Not Shown) .................................................................................... 2.8
Muffler ..................................................................................................................................... 2.23
Muffler Assembly (All the above parts) .................................................................................... 2.22
Muffler Bracket Assembly (Includes Isolator) .......................................................................... 2.22
Muffler Pipe Subweld ............................................................................................................... 2.22
Muffler, NAPA Style 22385 ....................................................................................................... 2.22
N
DESCRIPTION PAGE
Neutral Safety/Back Up Alarm Switch ...................................................................................... 2.34
Nut .......................................................................................................................................... 2.14
Nut, 1/2" NF Lug ............................................................................................................. 2.12, 2.13
Nut, 1/2" x 13NC Stover B ................................................................................ 2.8, 2.10, 2.24, 2.42
Nut, 1/4" - 28 NF JAM LH Thread ........................................................................................... 2.34
Nut, 1/4" - 28NF JAM, RH Thread .......................................................................................... 2.34
Nut, 1/4" - 28NF Lock, Plated ........................................................................................... 2.34, 5.1
Nut, 3/8" - 16NC Flange .................................................................... 2.5, 2.6, 2.34, 2.42, 2.44, 5.1
Nut, 3/8" - 16NC Lock, 4 WD ........................................................................................... 2.33, 2.35
Nut, 3/8" - 24NF Lock .............................................................................................................. 2.34
Nut, 5/16" NF Jam ................................................................................................................... 2.39
Nut-Brake Mounting, Rear Axle Assembly ................................................................................. 4.4
Nut-Pinion, Rear Axle Assembly ................................................................................................ 4.4
DESCRIPTION PAGE
Oil Tank - Intake, Transmission - Gear Pump Intake 4WD ........................................................ 3.14
Oil Tank - Lower Return, Filter Assembly - Return .................................................................. 3.14
Oil Tank - Lower Return, Transmission - Charge Intake 2WD ................................................. 3.14
Oil Tank - Lower Return, Transmission - Charge Intake 4WD .......................................... 3.3, 3.14
Oil Tank - Upper Return, Transmission - Discharge .................................................. 3.1, 3.3, 3.14
On Hand Spare Parts .............................................................................................................. 2.52
Operator Position for Backhoe Operation .................................................................................. 2.1
Operator Position for Endloader Use ......................................................................................... 2.1
Outrigger ................................................................................................................................ 2.42
Outrigger Cylinder .................................................................................................................. 2.42
Outrigger Cylinder .................................................................................................................. 2.42
Outrigger Guard ..................................................................................................................... 2.42
DESCRIPTION PAGE
P Port Steering Column, Transmission - Gear Pump 2WD ....................................................... 3.8
P Port Steering Column, Transmission - Gear Pump 4WD ....................................................... 3.8
Pad, Outrigger Foot ................................................................................................................ 2.42
Parts Ordering Information ........................................................................................................ 4.7
Pedal Block, 2 WD ........................................................................................................... 2.32, 2.33
Pedal Shaft, 2WD ............................................................................................................ 2.32, 2.33
Pedal Shaft, 4WD (Not Shown) ................................................................................................ 2.33
Pedal Spring, 2 WD ......................................................................................................... 2.32, 2.33
Pedal Stop Bolt, 2 WD ..................................................................................................... 2.32, 2.33
Pillow Block Bearing, 2 WD ............................................................................................. 2.32, 2.33
Pin 1" X 7-3/8" ................................................................................................................ 2.46, 2.47
Pin, 1" x 4-1/8" ......................................................................................................................... 2.42
Pin, 1" x 4-3/4" .................................................................................................................... 2.2, 5.1
Pin, 1" x 5-1/4" - Lift Cyl. (Head) ........................................................................................ 2.5, 2.6
Pin, 1" x 5-1/4", Front Curl Cylinder ...................................................................... 2.2, 2.3, 2.5, 5.1
Pin, 1" x 5-1/4", Outrigger to Foot Pad Pull ............................................................................. 2.42
Pin, 1" x 6-1/2" (NOT SHOWN) .............................................................................................. 2.47
Pin, 1" x 6-7/8" ................................................................................................................. 2.10, 2.11
Pin, 1" X 8" .............................................................................................................................. 2.46
Pin, 1" x 9-1/2" ......................................................................................................................... 2.47
Pin, 1” x 6-1/4" ......................................................................................................................... 2.43
Pin, 1-1/2" x 11" ....................................................................................................................... 2.47
Pin, 1-1/2" x 7-1/4" ................................................................................................................... 2.45
Pin, 1-1/2" X 8-1/2" .................................................................................................................. 2.46
Pin, 1-1/2" x 8-1/4" ........................................................................................................... 2.43, 2.44
Pin, 1-1/4" x 6-5/8" ................................................................................................................... 2.45
Pin, 1-1/4" x 7-3/4" ................................................................................................................... 2.44
Pin, 1-1/4" x 7-3/4" ................................................................................................................... 2.43
Pin, 1-1/4" x 7-5/8" ........................................................................................................... 2.46, 2.47
Pin, Front Axle Picot 5-1/2" Long ............................................................................................... 2.8
Pin, Front Axle Pivot 1-1/2" x 7-1/4" L ....................................................................................... 2.9
Pin, Linch 1/4" Diameter .......................................................................................................... 2.42
Pin, Linch 1/4" Diameter .......................................................................................................... 2.47
Pin, Valve Hose Link Pivot ........................................................................................................ 2.39
Pin/w - Clam Bucket Pivot .......................................................................................................... 5.1
Pin/w - Clam Cylinder (Barrel End) ........................................................................................... 5.1
Pin/w - Clam Cylinder (Rod End) .............................................................................................. 5.1
Pinion-Differential, Rear Axle Assembly .................................................................................... 4.4
Plate, Engine ........................................................................................................................... 2.24
Plate-Differential (Selective Thickness), Rear Axle Assembly ................................................... 4.4
Plate-Differential, Rear Axle Assembly ...................................................................................... 4.4
Plug-Cover, Rear Axle Assembly ............................................................................................... 4.4
Port B, Steering Column - Port “T” ......................................................................................... 3.13
Port C, R. Valve - Return ......................................................................................................... 3.13
Power Steering Cylinder ........................................................................................................... 2.9
Power Steering Rod .................................................................................................................. 2.9
Pressure Port - Gear Pump, Rear Valve Assembly - Intake Port ................................................ 3.3
Pressure Port - Gear Pump, Steering Column - Port “P” ................................................... 3.1, 3.3
Pressure Port - Gear Pump,Rear Valve Assembly Intake Por ...................................................... 3.
Pressure Port - R. Valve Assembly, Front Valve - Intake ............................................................ 3.11
Pump, Double 2WD & 4WD ..................................................................................................... 2.25
Punch, for 1-05.SD & TT Tooth Caps ...................................................................................... 2.52
Purging Air From Fuel System Service Procedures ............................................................... 2.53
Purging Air From Fuel System Service Procedures Continued ............................................... 2.54
R
DESCRIPTION PAGE
Quick Attach Backhoe Buckets after May 1, 1998 ..................................................................... 2.49
DESCRIPTION PAGE
R Port Steering Column, Steering Cylinder .............................................................................. 3.8
Race, Inner .............................................................................................................................. 2.14
Radiator Assembly .................................................................................................................. 2.19
Rear Axle ................................................................................................................................ 2.27
Rear Axle Assembly .......................................................................................................... 4.3 to 4.4
Rear Curl Cylinder .................................................................................................................. 2.48
Rear Deck Lid .......................................................................................................................... 2.31
Reflective Tape, Amber .............................................................................................................. 2.5
Reflector, Red ......................................................................................................................... 2.45
Regular Backhoe Buckets before May 1, 1998 ......................................................................... 2.50
Restrictor w/Spring ................................................................................................................. 2.37
Retainer-Oil Seal, Rear Axle Assembly ..................................................................................... 4.4
Return - Front Valve Assembly, Oil Cooler .............................................................................. 3.10
Return Port - R. Valve Assembly, Drive System Block ............................................................... 3.11
Rim .......................................................................................................................................... 2.13
Rim, Front - 2WD .................................................................................................................... 2.12
Rim, Front - 4WD .................................................................................................................... 2.12
Ring-Snap, Rear Axle Assembly ............................................................................................... 4.4
Ring-Wheel Bearing Retaining, Rear Axle Assembly ............................................................... 4.4
Ripper, Quick Attach ................................................................................................................ 2.49
Rod - 1/4"-28NF Linkage ........................................................................................................ 2.34
Rod, Boom & Crowd ................................................................................................................ 2.44
Rod, Front Curl ......................................................................................................................... 2.2
Rod, Rear Curl ....................................................................................................................... 2.48
Roll Pin ........................................................................................................................... 2.48, 2.51
ROP, 4 Pt. MF - Weld on Type (FACTORY EQUIPPED) ....................................................... 2.10
ROP, 4 Pt. MH - Weld on Type (FACTORY EQUIPPED) ........................................................ 2.11
Rubber Motor Mount ............................................................................................................... 2.24
Rubber Street Pad ................................................................................................................... 2.42
DESCRIPTION PAGE
Safety Tips ................................................................................................................................. 1.3
Sample: Limited New Product Warranty ..................................................................................... 1.2
Schematic-View of Typical Control Valve Assembly ................................................................... 4.6
Seal ......................................................................................................................................... 2.14
Seal-Pinion, Rear Axle Assembly .............................................................................................. 4.3
Seal-Shaft Inboard, Rear Axle Assembly .................................................................................... 4.4
Seal-Shaft Outboard, Rear Axle Assembly ................................................................................ 4.4
Seat Assembly, Swivel .............................................................................................................. 2.36
Seat Belt Assembly (Both Halves) ........................................................................................... 2.36
Shaft-Axle Flanged, Rear Axle Assembly ................................................................................... 4.4