©2004 TESA Switzerland All Rights Reserved.
Page 2-16
User's Manual
MH3D
The MH3D control box is a shop-hardened control unit with the following:
• A power switch under the front left edge of the console
• A MH3D Software Card
• A PCMCIA "Smart Card" for storing programs
• A 32-bit RISC processor
• A serial output/parallel port
• A bright, clear VGA monitor
CAUTION
Do not attempt to connect or disconnect any cables when the power is “on”.
Personal injury and/or electrical damage may occur.
Controller
MH3D Display
To Next Page
Loading...
