Tesmec PT2450 - Alarm and Error Information; Alarm List Description

ALARM LIST DESCRIPTION
ALARM LIST DESCRIPTION Data: 25.06.2018 Pagina: 1 di 8
ID MACHINE DESCRIPTION ALARM OR WARNING
ID520192 Monitor - Engine Motor - Can Comunication Fault
ID520193 Monitor - Card S1 - Can Comunication Fault
ID520194 Monitor - Card S2 - Can Comunication Fault
ID520195 Monitor - Card S3 - Can Comunication Fault
ID520196 Monitor - Card S4 - Can Comunication Fault
ID520197 Monitor - Card S5 - Can Comunication Fault
ID520198 Monitor - Radio Stringing - CanComunicationFault
ID520224 Radio Stringing Receiver - CanComunicationFault
ID520225 Radio Stringing - CanComunicationFault
ID520226 Radio Stringing - Radio Switch Or Joystick Not In Middle Position
ID520227 Radio Stringing - Stop Push Button Pressed
ID520228 Emergency Push Button Pressed
ID520229 Oil - Temperature Too High
ID520230 Return Oil Filter Obstructed
ID520231 Remote Emergency Push Button Pressed
ID520232 Error on remote emergency relay
ID520233 Oil - Pressure Too High
ID520234 Over Max Rpm
ID520235 Engine Oil Pressure Too High
ID520236 Engine Water Temperature Too High
ID520237 Connected Machinery Are Not The Same Model
ID520238 Alarm From Machine Connected
ID520239 Connection With Machine ID 1 Fault
ID520240 Connection With Machine ID 2 Fault
ID520241 Connection With Machine ID 3 Fault
ID520242 Connection With Machine ID 4 Fault
ID520243 FreeWhell - One Output Pin Card Fault
ID520244 FreeWhell - Check mA On Auxiliary Valve Fault
ID520245 FreeWhell - Deactive Procedure Fault During Auxiliary Valve Check
ID520246 FreeWhell - Deactive Procedure Fault During BW Rotation Valve Check
ID520247 FreeWhell - Speed Over 5 Kmh (3.1 mph)
ID520248 FreeWhell - Auxiliary Pull Value Not Correct
ID520249 Engine - Error Air Cleaner
ID520250 Engine - Battery Not In Charge
ID520251 Engine - Temperature Too Cold
ID520252 Alarm From Machine Connected - ID 1
ID520253 Alarm From Machine Connected - ID 2
ID520254 Alarm From Machine Connected - ID 3
ID520255 Alarm From Machine Connected - ID 4
ID520256 Warning From Machine Connected - ID 1
ID520257 Warning From Machine Connected - ID 2
ID520258 Warning From Machine Connected - ID 3
ID520259 Warning From Machine Connected - ID 4
ID520260 Stringing Not Permitted Because Bypass Is Active On Othe Connected Machine
ID520261 Wait For The Pre-heating Procedure To Complete
ID520262 Engine Off