TESTING Vicat - Airflow Control Operation; Stopping Running Fans

Single Station Vicat Test Apparatus
1.0360
21
3.6.5 Stop running fans
In order to remove the excess heat the fans may continue to run until the heat sinks reaches the run-on
temperature even after switching off the temperature-controller.
If you want to stop the fans before reaching the "run-on temperature", press the button.
The fan button changes to and the fans continue to run with a low idle speed.
Monitoring
12 1 21.3 °C
376 sec 34.3 mm
3:45 1 95.3 % rH
Wait state