TESTING Vicat - Commissioning; Placement and Ambient Conditions; Scope of Delivery; Included Accessories

Single Station Vicat Test Apparatus
1.0360
7
1.5.3 Commissioning
Place the equipment on an even and vibration-free base with a suitable load-bearing capacity. This equip-
ment is intended for operation in dry rooms.
The ambient conditions that must be observed are as follows:
Permissible temperature conditions:
+ 5 … 40°C
Permissible relative humidity:
30 ... 50%
Maximum elevation:
1,000 metres above sea level
Caution!
Take normal and reasonable precautions so that system does not suffer impacts or
is not damaged in another way.
1.6 Scope of delivery
The apparatus comes with the following standard accessories:
Power cord
RS232 cable
Handset unit
Hex key (SW 1.25 / SW: 2 for needle washing unit), (SW: 2 for cone washing unit)
Operating Manual for apparatus / Operating Manual for software
Table 1:
type of
machine
Vicat needlel
Vicat
rings
glass plates
spare
brushes
for needle
1.0360
1 station
cement
Ø1,13mm, 1 piece
+2 spare pieces
70/80 mm
1 piece
1 piece
+1 spare piece
1 pair
1.0360.ASTM
1 station
cement
Ø1,0mm 1piece
+2 spare pieces
60/70mm
1 piece
1 piece
+1 spare piece
1 pair
1.0360.EN/ASTM
1 station
cement
Ø1,13mm 1 piece
+2 spare pieces
Ø1,0mm, 3 pieces
70/80mm
1 piece
60/70mm
1 piece
1 piece
+1 spare pice
1 pair