TESTO 324 - Date;Time; Energy Management; Display Brightness; Printer

6 Using the product
32
1. Select the line: [▲], [▼] → [Edit].
2. Select the unit to be changed: [▲], [▼] → [OK].
3. Confirm the entry: [Finished].
6.1.2.2. Date/Time
Date, time mode and time can be set.
Calling up the function:
> [] → Instrument settings → [OK] → Date/Time → [OK].
Set date/time:
1. Select parameter: [◄], [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and sometimes [◄], [►] → [OK].
3. Save settings: [Finished].
6.1.2.3. Energy management
Automatic instrument shutdown (Auto-Off) and switching off of the
display light in battery operation can be set.
Calling up the function:
> [] → Instrument Settings → [OK] → Energy Management
→ [OK]
Making settings:
1. Select function or parameter: [▲], [▼] → [Edit].
2. Set parameter: [▲], [▼] and partly [◄], [►] → [OK].
3. Save changes: [Finished].
6.1.2.4. Display brightness
The intensity of the display illumination can be set.
Calling up the function:
> [] → Instrument Settings → [OK] → Display Brightness →
[OK]
Performing settings
> Set parameter: [◄], [►] → [OK].
6.1.2.5. Printer
The headers (lines 1-3) and the footer for the printout can be set.
The printer that is used can be enabled.
Call up function:
> [] → Instrument settings → [OK] → Printer → [OK].