TESTO 324 - Bluetooth; Automatic Measuring Rate

6 Using the product
33
Enabling the printer:
The 0554 0553 and 0554 0620 printers can only be
selected if the Bluetooth
®
interface is enabled, see
Bluetooth®, page 33.
When using the testo IrDA record printer 0554 0547, the
testo IrDA fast printer 0554 0549 must be selected.
Graphics can be printed out using the following Testo
printers:
0554 0547 IrDA report printer
0554 0549 IrDA report printer
0554 0553 Bluetooth
®
printer
0554 0620 Bluetooth
®
printer
1. Select printer → [OK].
2. Select the printer: [▲], [▼] → [OK].
- The printer is enabled and the Printer menu is opened.
Setting the print text:
1. Print text → [OK].
2. Select function: [▲], [▼] → [Edit].
3. Enter values → [OK].
4. End input: [Finished].
5. Save the entry: [Finished].
6.1.2.6. Bluetooth
®
This menu is only available if the instrument is equipped with
Bluetooth. The Bluetooth module can be switched on / off.The relay
can now be tested.
Calling up the function:
> [] → Instrument Settings → [OK] → Bluetooth → [Edit].
Making settings:
> Set parameter → [OK].
6.1.2.7. Automatic measuring rate
The automatic measuring rate can be switched on or off.
If the automatic measuring rate is on, the following measuring rate
is saved for the individual measurement programs (except
Programs menu):