TESTO 324 - Flow Pressure

6 Using the product
70
Parameter Explanation
Max. Highest pressure during the current
measurement
2. End measurement: [].
3. Save measurement result: [Save].
Options
> [Options] → Show Graphic: a section of past measuring
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options] → Manometer: the measuring values are displayed
in the same way.
> [Options] → Overall graphic curve: the measuring values
across the overall measuring time are displayed in a line graph.
6.2.9.2. Flow pressure
Calling up the function:
> [] → Measurements → [OK] → Controller test → [OK].
1. Select Flow pressure. [▲], [▼] → [OK].
- Measurement is started
The following values are displayed:
Parameter Explanation
Pressure Current pressure
Min Lowest pressure during the current
measurement
Max. Highest pressure during the current
measurement
2. End measurement: [].
3. Save measurement result: [Save].
Options
> [Options] → Show Graphic: a section of past measuring
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options] → Manometer: the measuring values are displayed
in the same way.
> [Options] → Overall graphic curve: the measuring values
across the overall measuring time are displayed in a line graph.