TESTO 324 - Inspector; Language

6 Using the product
34
Messzeit Measuring rate
< 15 min 1 s
> 15 min 1 min
If the automatic measuring rate is switched off, a measuring rate of
1 second is used, irrespective of the measuring time.
Call up a function:
> [] → Instrument settings → [OK] → Autom. meas. rate →
[OK].
Making settings:
1. [Edit]
2. Set parameter: [▲], [▼] → [OK].
6.1.2.8. Inspector
In this menu, an inspector can be selected and/or a new one can
be created.
Calling up the function:
> [] → Instrument settings → [OK] → Inspector → [OK].
Making settings:
1. Edit/create inspector: [▼] → [Edit] → [Finished].
2. Set parameter: [▲], [▼] and sometimes [◄], [►] → [OK].
3. Save changes: [Finished].
4. [Finished].
Selecting an inspector
> Select inspector: [▲], [▼] → [Enable] → [Finished].
6.1.2.9. Language
The menu language can be set. The number of available
languages depends on the activated country version, see Country
version, page 35.
Calling up the function:
> [] → Instrument Settings → [OK] → Language → [OK]
Activating the language:
> Select the language → [OK].