TESTO 324 - Country Version; Password Protection

6 Using the product
35
6.1.2.10. Country version
The country version with national defaults (measurement types,
standard values) can be set. The selection of the country version
influences the menu languages that can be enabled.
Call up function:
> [] → Instrument settings → [OK] → Country version →
[OK].
This setting can be password protected. A password is
specified in the menu Password Protection, see
Password protection, page 35.
Possibly:
> Enter password: [Enter] → Enter password → [Finished] →
[OK].
Setting the country version:
1. Select the country version: [▲], [▼] → [OK].
2. Confirm confirmation request: Yes → [OK]
- The system is restarted.
6.1.2.11. Password protection
The password protection is only valid for functions identified by the
following symbol: or .
Password protection can be enabled/disabled, the password can
be changed.
To disable password protection, change the password to 0000
(factory setting).
Call up function:
> [] → Instrument settings → [OK] → password protection
→ [OK].
Possibly:
> Enter the current password:
[Enter] → Enter password → [Finished] → [OK].
Changing the password:
1. [Edit].
2. Enter a new password → [Finished].
3. [Edit].
4. Enter the new password again to confirm → [Finished].
5. Save changes: [Finished].