TESTO 324 - Page 46

6 Using the product
46
- Zeroing starts (5 s)
- Regulation
Option
> End stability time early: [Next]
> End measurement period early: [Next]
- Measurement is cancelled.
- Leakage test (leakage measurement) is ended.
2. Evaluate measurement result: [▲], [▼] → [OK].
- The measurement result is displayed
3. Save measurement result: [Save].
- The measurement result is displayed
4. Evaluate measurement result:
Leakage test result Select result
Visual check Select result
System checked Enter system details
Gas meter number Enter gas meter number
Gas meter level Enter gas meter level
Inspector Enter name of inspector
5. Edit values: [Edit].
6. Enter values. [▲], [▼] and sometimes [◄], [►] → [OK].
7. Save entries: [Save].
Option
> [Options] → Show Graphic: a section of past measuring
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options] → Settings: The type of test (reference
pressure/operating pressure) can be set and the reference
pressure of 23 mbar is displayed.
> [Options] → Volume: the pipe volume is determined directly
(the option is no longer available after the measurement).
> [Options] → Manometer: the measuring values are displayed
in the same way.
> [Options] → Factory setting: the values are reset to the
default settings.
> [Options] → Overall graphic curve: the measuring values
across the overall measuring time are displayed in a line graph.