TESTO 324 - Page 64

6 Using the product
64
Calling up the function:
> [] → Measurements → [OK] → Programs → Spot
measurement → [OK] → Enable.
- Current measuring values are displayed
- Zeroing starts (5 s)
Option
Spot
measurement
1. [Edit].
2. Edit program name: → [Edit] → [▲], [▼]
and sometimes [◄], [►] → [OK].
3. Save changes: [Finished].
Configure
measurement
view
1. Select the program: [▲], [▼] → [Edit].
2. Select Measurement view: [▼] → [Edit].
3. Select parameter: [▲], [▼] → []
(enabled), [] (disabled)
4. Save changes: [Finished].
1. Start measurement: [ ].
> End measurement period early: []
- Measurement is cancelled.
2. Save measurement result: [OK].
Options
> > [Options] → Show Graphic: a section of past measuring
values is displayed in a line graph (zoom function available [▲],
[▼]).
> [Options] → Configure Graphic: the measurement
parameters to be represented (max. 4) can be displayed ( ) or
hidden ( ).
> [Options] → Number of lines: change the number of
measuring values per display page.
> [Options] → Manometer: The measuring values are displayed
in the same way.
> [Options] → Measurement view: (this function is not available
during a measurement): The reading display menu is opened.
Up to 8 measurement parameters can be selected.
> [Options] → Measurement view order: (this function is not
available during a measurement): the reading display order can
be changed.
> [Options] → Note: customer-specific notes can be stored.