Texas Instruments DLP NIRscan User Manual

NIRscan Nano GUI www.ti.com
After a scan configuration is selected with the drop-down, define a reference by scanning a reflective
reference standard. Then, click the Set as Reference button. After these steps, scanning any sample will
allow the plot of absorbance as shown in Figure 3-5.
Figure 3-5. Absorbance Spectrum of Aspirin
26
Operating the DLP NIRscan Nano EVM DLPU030B–June 2015–Revised July 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

Texas Instruments DLP NIRscan Specifications

General

Brand	Texas Instruments
Model	DLP NIRscan
Category	Motherboard
Language	English