Texas Instruments Extensa 450 Series User Manual

To install an external keyboard or external PS/2 mouse on the notebook, use the
following procedure:
1. Ensure that the notebook is powered off.
2. Locate the external PS/2 ports at the rear of the notebook (see Figure 2-6).
3. Attach the PS/2 cable from your mouse and/or keyboard cable to the PS/2
port(s).
4. Power on any other peripheral devices you may have connected to the notebook,
and then power up the notebook.
PS/2 Ports
Figure 2-6 PS/2 Port Assignments/Pinouts
Installation
2-7

Texas Instruments Extensa 450 Series Specifications

General

Brand	Texas Instruments
Model	Extensa 450 Series
Category	Laptop
Language	English