Texas Instruments Extensa 450 Series - 2.5 Installing External Devices

c
Caution: There is danger of explosion if the battery is incorrectly re-
placed. Replace the battery only with the same or an equivalent type
recommended by the manufacturer. Discard used batteries according to
the manufacturer’s instructions.
2.5
Installing External Devices
Most external devices connect to the Notebook via the connectors on the rear of the
notebook and on the rear of the Port Adapter supplied with the notebook (see Figure
2-5 for port assignments).
2.5.1
Installing an External Keyboard/Mouse
As shown in Figure 2-6, the notebook has provisions for two external PS/2
compatible devices (keyboard, mouse, etc.) that may be attached to the notebook.
The pinouts for the 6-pin Mini-DIN connectors are also provided in Figure 2-6.
Figure 2-5 Extensa Port Assignments
2-6
Installation