•
Includes protection circuit against damage caused when printer is
powered up, or operated at higher voltages
•
Integral IDE controller
•
Provides a complete IDE interface with DMA control (except for
optional buffers)
•
Integral address decoder- provides selection of all primary and secondary ISA
addresses including COM1-4 and LPT1-3.
•
Enhanced Power Management Function
•
Special configuration registers for power down
•
Enhanced programmable power-down and wake-up modes
•
Auto power-down and wake-up modes
•
3 special pins for power management
•
Typical current consumption during power-down is less than 10A
4.2.3
Video Subsystem
The video subsystem, implemented on the Main Board and on the LCD Display
Unit, displays text, graphics and drives an external VGA port. The video subsystem
is implemented with a Cirrus Logic 6245 high performance flat panel/RT VGA
controller and supporting logic and video RAM (512KB).
The major features of the VGA controller include:
•
Highly integrated design (flat panel / CRT VGA controller, RAMDAC, clock
synthesizer)
•
Multiple Bus Architecture Integrated Interface
•
Local Bus (32-bit CPU Direct and VL)
•
EISA/ISA (PC/AT) 16-bit Bus
•
Advanced frame buffer architecture uses available display memory, maximizing
integration and minimizing chip count
•
Integrated programmable linear address feature accelerates GUI performance
•
High performance resulting from zero wait state writes (write buffer) and
minimum wait state reads (internal asynchronous FIFO design)
•
Supports panel resolutions up to 1280 x 1024 resolution including 800x600
and 1024x768
•
SMARTMAP intelligent color to gray scale conversion enhances text legibility
•
Text enhancement feature improves white text contrast on flat panel displays
•
Fully Compatible with IBM VGA
4-6
Theory
To Next Page
Loading...