Texecom Premier 888 - System Tests; Test

Th
e
U
ser
M
enu
P
rem
i
er
888
&
8168
U
ser
M
anua
l
24 INS177
System Tests
Users with access to this option can test various system
outputs to ensure that they operate correctly. These
include any outputs that have been programmed for
specific operations i.e. bringing on floodlights, sounding
buzzers etc. The internal sounders, speakers and the
external sounder can also be tested to ensure that they are
operating correctly.
➤ To perform system tests, proceed as follows:
Enter a valid User code
....
........
....
, the display
should look like this:
!"#$"%#&'()#)"
*+,#-$-).,/
Press
/
//
/
, the display should look like this:
!"#$"%#&'()
G-.+#K.(%/
Press
#
##
#
, the display should look like this:
!"#$" %#&'()# )"
=1.&# A$-).,# T"L/
Press
#
##
#
, the display should look like this:
0%-C#]I A#)"#) .-)
U.@@#1- #####X DSS
Press
)
))
)
until the required test is displayed i.e.
Speaker, the display will look something like this:
0%-C#]I A#)"#) .-)
AN.'O.+ #####X DSS
Press
#
##
#
to test the selected output.
!
Only outputs that have been programmed for ‘User
Test’ can be activated.
When all the required outputs have been tested press
/
//
/
, the display should look like this:
!"#$" %#&'()# )"
!"#A$ -).,#). -)-/
!
Any outputs that have been left ‘On’ will
automatically be turned ‘Off’ when the System Tests
menu is exited.
Press
(
((
(
to exit the menu and return to normal.
Do Walk Test
Users with access to this option can walk test any of the
zones on the system to ensure that they operate correctly.
A walk test can only be performed when the system or
area is disarmed. 24 Hours zones (except Fire and
Tampers) are disabled during walk test allowing Audible
PA buttons, Silent PA buttons, etc. to be tested. To perform
a walk test, proceed as follows:
Enter a valid User code
....
........
....
, the display
should look like this:
!"#$"%#&'()#)"
*+,#-$-).,/
Press
/
//
/
, the display should look like this:
!"#$"%#&'()
G-.+#K.(%/
Press
#
##
#
, the display should look like this:
!"#$" %#&'()# )"
=1.&# A$-).,# T"L/
Press
)
))
)
until the display looks like this:
!"#$" %#&'()# )"
!"#;' @O#).-) /
Press
#
##
#
, the display will look something like this:
;'@O#). -)#'+. '-X
##X#WWW WWW99# \
Use keys
!
!!
!
-
1
11
1
to walk test specific areas i.e.
!
= Area A, the display will look something like this:
;'@O#).-)#'+.'-X
##X#*WWWWW99#\
!
Only areas that exist on the system can be selected.
A ‘Star’ means the area can be selected and a ‘Dot’
means the area cannot be selected.
Pressing
2
will select/deselect all areas.
Pressing
%
will toggle between areas A to H and
I to P (Premier 8168 only).
Press
#
##
#
, the display will look something like this:
####W#_ D_I#W
Every time zones are activated the keypad will chime and
the display will look something like this:
F"(.#53 5X*>)1 R.
T"%(L.# !.).>) "+#X
Press
/
//
/
when finished, the display should look like this:
!"#$" %#&'()# )"
!"#;' @O#).-) /
Press
(
((
(
to exit the menu and return to normal.