Texecom Premier 888 - Menu; User Menu

P
rem
i
er
888
&
8168
U
ser
M
anua
l
Q
u
i
c
k
R
e
f
erence
G
u
id
e
INS177 39
Menu Page
Arming Menu Continued…
View Act. Faults Enter a valid User code
....
18
Use the Scroll key to find View Act. Faults then press Yes
)
then
#
Use the Scroll key to scroll up and down through the zones
)
Press Yes when finished
#
View Act. Counts Enter a valid User code
....
18
Use the Scroll key to find View Act. Counts then press Yes
)
then
#
Select the required areas using keys 1 - 8
!
-
1
Press Yes when finished
#
Menu Page
User Menu
Access the User Menu Enter a User code
....
19
Press Menu and then press Yes
/
then
#
Viewing the Event Log Access the User menu
..../#
19
Use the Scroll key to find View Event Log then press Yes
)
then
#
Press Down for the previous event (back in time)
)
Press Up for the next event (forward in time)
)
Change User Code Access the User menu
..../#
23
Use the Scroll key to find Change Code then press Yes
)
then
#
Enter a new User code 4, 5 or 6 digits
....
Press Yes to accept the code
#
Edit Chime Zones Access the User menu
..../#
23
Use the Scroll key to find Edit Chime Zones then press Yes
)
then
#
Select zones using keys 1 - 8
!
-
1
Press Chime to select the zone for chiming
&
Press Menu when finished
/
System Tests Access the User menu
..../#
24
Use the Scroll key to find System Tests then press Yes
)
then
#
Use the Scroll key to select the an option then press Yes
)
then
#
When testing outputs, use the Scroll key to select an option
)
To test outputs, press Yes or use keys 1 - 8
#
or
!
-
1
Press Menu when finished
/
Do Walk Test Access the User menu
..../#
24
Use the Scroll key to find Do Walk Test then press Yes
)
then
#
Test required zones
Press Yes to accept the Time
#
Press Menu when finished
/
Enable Engineer Access the User menu
..../#
26
Use the Scroll key to find Enable Engineer then press Yes
)
then
#
Set System Time Access the User menu (see above)
..../#
26
Use the Scroll key to find Set System Time then press Yes
)
then
#
Enter the correct Time (HH:MM)
5566
Press Yes to accept the Time
#
Set System Date Access the User menu
..../#
27
Use the Scroll key to find Set System Date then press Yes
)
then
#
Press Yes
#
Enter the correct Date (DD/MM/YY)
776688
Press Yes to accept the Date
#