Texecom Premier Elite 8XP-W - System Status; System Status Indicators; System Status Display Options; Erase All Function Warning

Premier Elite 8XP-W & 32XP-W Installation Manual
38 INS467-4
System Status
Shows various System Details
1.   = Receiver connected to Premier Network correctly  = Not Connected
2.  = Firmware version of the Premier 8XP-W/32XP-W
3.  = Receiver is being Jammed
4.  = Commission Mode
5.  = the Wireless Network. (not the Premier Network)
6.  = RICOCHET™ Panel Firmware
7.  = Legacy Panel Firmware
 
 
 
   

/

 
  
Erase All will delet e all devices
and will delete the W ireless Network ID.
You should only delet e the Net work I D
if t he system is conf lict ing with anot her
wireless network.

   

   
Bot tom line indicates
JAM = Receiver is being jammed
CM = COMMISSION MODE

/


/


/

 The erase all function MUST NOT be used on Ricochet MT2 systems.