Speech Dialler Operators Manual
30 INS233
Record/Play Voice Messages
These Remote Access commands allow you to record and playback voice messages
1 - 4 through your telephone handset.
These commands are only available if the “Rem. Access Code” option is
enabled (see page 23).
! To Record/Play a Voice Message:
1
Establish a Remote Access connection with the Speech Dialler.
2
To record a Voice Message press [*][9] followed by the message
number [1] – [4] on your telephone. You will hear a short beep. Talk
clearly into your telephone handset.
3
Press [0] on your telephone to stop the recording mode.
4
To play a voice message press [9] followed by the message number [1]
– [4] on your telephone. The selected message is played back through
your telephone handset.
5
Press [0] on your telephone If you want to cancel playback mode or wait
until the message has finished playing.
6
Use your telephone to select other Remote Access commands or press
[#] to hang-up the connection with the Speech Dialler.
Record/Playback Memo
These Remote Access commands allow you to record and playback the memo
message through your telephone handset.
! To Record/Playback a Memo:
1
Establish a Remote Access connection with the Speech Dialler.
2
To record the memo press [*][0] on your telephone. You will hear a short
beep. Talk clearly into your telephone handset.
3
Press [0] on your telephone to stop the recording mode.
4
To play the memo press [0] on your telephone. The memo message is
played back through your telephone handset.
To Next Page
Loading...
Need help?
General
