Texi Iris 10 Operation Manual
2
TABLE OF CONTENTS
SAFETY RULES…………………………………………………………….…………..3
Machine construction and main functions………………………………………….…5
10-needle embroidery machine………………………………………………………………….5
LCD panel………………………………………………………………………………………….5
USB port……………………………………………………………………………………………6
Needle bar positioning……………………………………………………………………………6
Safety device………………………………………………………………………………………6
Machine basic parts and their functions……………………………………..7
Front view…………………………………………………………………………………………..7
Right/rear view………………………………………………………………………………….….8
Panel LCD main buttons……………………………………………………………………….....9
Accessories………………………………………………………………………………………...9
Machine installation……………………………………………………………10
Precautions for installation and transportation…………………………………………………10
Basic requirements of installation………………………………………………………………..10
Adjusting the height of the machine….………………………………………………………….11
Regulation panel…………………………………………………………………………………..12
Assemble thread rack……………………………………………………………………………..12
Installation of embroidery frame………………………………………………………..………...14
Basic steps before starting embroidering……………………………………………..………...15
Bobbin installation………………………………………………………………………………….15
Removal of bobbin case………………………………………………………………………......15
Inserting bobbin into bobbin case………………………………………………………………...16
Bobbin case installation……………………………………………………………………………17
Starting the machine.…………………………………………………………...17
Main functions on the LCD panel…………………………………………………………………18
Pattern input………………………………………………………………………………………...19
Select embroidery pattern………………………………………………………………………….20
Select embroidery frame (hoop)…………………………………………………………………..20
Put material on embroidery frame (hoop)………………………………………………………..21
Preparing embroidery frame………………………………………………………………………21
Install embroidery frame in the machine...……………………………………………………….22
Embroidery frame (hoop) installation…………………………………………………………….22
Check embroidery area……………………………………………………………………………24
Threading the machine…………………………………………………………………………….24
Starting embroidery………………………………………………………………………………...27
Thread tension………………………………………………………………………………………27
Correct thread tension……………………………………………………………………………...27
Take off embroidery frame and material………………………………………………………….28
Removal of the material…………………………………………………………………………….28
Shutdown……………………………………………………………………………………............29
Description of main LCD functions……………………………………………………………..…29
Pattern selection and management interface…………………………………………………...30
Embroidering colour setting interface……………………………………….…………………....31
Pattern setting interface……………………………………………………….…………………...31
Profile use interface………………………………………………………………………………...32
Needle replacement……………………………………………………………………………...…32
Easy replacement of bobbin………………………………………………………………...….….33
To Next Page
Loading...
Need help?
General
