Texi Iris 10 User Manual

Texi Iris 10 Operation Manual
28
User may see the bottom thread from the right side of
the cloth since the upper thread tension is too tight.
Since the upper thread tension is too low, the upper thread
on cloth is loose, and thread circles may be visible.
Rotate the tension knob counter clockwise to increase
the thread tension.
Rotate the tension knob clockwise to decrease the
thread tension.
Note:
·Check the thread tension after the first 100 stitches of each
colour.
·Because of different types of the material embroidery the re-
sult may not fulfill one’s expectations. Before embroidering,
please check if the thread tension is appropriate for the type
and thickness of the material chosen.
Take off embroidery frame and material
Once embroidering has been finished, remove embroidery frame (hoop) from the machine and take the material off the frame.
Note:
·Before removing the embroidery frame, make sure the machine has stopped running.
·After embroidery frame has been removed, keep embroidery frame away from any part of the embroidery machine.
·Do not raise embroidery frame stand to avoid potential damage.
The dowel (2) on embroidery frame stand arm shall
stretch out from the hole on both sides of embroidery
frame.
1.Left arm of embroidery frame stand
2.Right arm of embroidery frame stand
3.Embroidery frame holder
4.Embroidery frame holder
·Loosen the screws on external embroidery frame
·Remove external frame and take off the cloth.
Removal of material
Grab the left and right side of the embroidery frame,
raise the frame stand slightly from metal endings (1) and
pull out the embroidery frame toward oneself.

Texi Iris 10 Specifications

General

Brand	Texi
Model	Iris 10
Category	Sewing Machine
Language	English