Texi Iris 10 User Manual

Texi Iris 10 Operation Manual
33
·Keep the flat side at needle point facing the front of the
machine, push the needle until you notice resistance
and tighten the screw with the screwdriver.
Easy replacement of bobbin
Before bobbin replacement, complete upper threading, but if bobbin is correctly threading on the machine, it may be easier to
replace the bobbin.
·Cut off the thread from the bobbin ·Bobbin replacement
· Connect the thread head from the new bobbin to the
head of the remaining thread of the last color.
·Pull the original thread from the needle bar guide groove.
Complete threading for the new thread again with the threader.Bobbin replacement is finished at that point.
Note: Do not pull knot out from the needle eye in order not to damage the needle.
Pull out the thread continuously until the position of knot, take out the needle bar guide groove, and cut off the knot on thread.

Texi Iris 10 Specifications

General

Brand	Texi
Model	Iris 10
Category	Sewing Machine
Language	English